Station info for MARS-2 – aprs.fi

Station info - map view · info · telemetry · weather · raw · status · beacons · messages · bulletins · browse · moving · my account

It is possible to search using wildcards (*?) after a prefix. Example: OH*

APRS igate – Statistics for 2025-02:
Comment:	K6DRK-14, RX-only iGate, Raspberry Pi 4, Nooelec RTL-SDR v5, Barnabe Mountain, California
Location:	38°01.61' N 122°42.98' W - locator CM88PA46AK - show map 12.4 km West bearing 263° from Lucas Valley-Marinwood, Marin County, California, United States [?] 15.6 km Southwest bearing 235° from Novato, Marin County, California, United States 38.2 km Northwest bearing 317° from San Francisco, San Francisco County, California, United States 105.1 km Northwest bearing 317° from San Jose, Santa Clara County, California, United States
Last position:	2025-02-22 16:27:04 UTC (9m52s ago) 2025-02-22 08:27:04 PST local time at Lucas Valley-Marinwood, United States [?]
Device:	WB2OSZ: DireWolf
Last path:	MARS-2>APDW16 via qAO,MARS-2
Positions stored:	374
Other SSIDs:	MARS-8 MARS-9 MARS-4 MARS-7 MARS-15 MARS-5 MARS-3 MARS-10 MARS-13 MARS-1 MARS-6
Stations heard directly:	35 on radio path – show map
Last heard a station directly:	2025-02-22 16:02:55 UTC (34m1s ago)
Position packets heard directly:	875 on radio path
Position packets sent to APRS-IS:	1330 – show map

callsign		pkts	first heard - UTC	last heard	longest	(rx => tx)	longest at - UTC

Only stations from which a position packet has been heard are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.