Comment:	www.github.com/handiko
Last status:	..::| Experimental Arduino-APRS |::..
Last beacon:	..::| Experimental Arduino-APRS |::..
Location:	40°49.20' N 82°58.46' W - locator EN80MT36BT - show map 1.3 km North bearing 4° from Bucyrus, Crawford County, Ohio, United States [?] 18.2 km Northwest bearing 302° from Galion, Crawford County, Ohio, United States 95.5 km North bearing 1° from Columbus, Franklin County, Ohio, United States 131.0 km Southwest bearing 235° from Cleveland, Cuyahoga County, Ohio, United States
Last position:	2025-02-28 08:52:29 UTC (13s ago) 2025-02-28 03:52:29 EST local time at Bucyrus, United States [?]
Device:	Unknown: Unknown
Last path:	KD8SIQ-1>APRS via N8HKO-3*,WIDE2-1,qAR,NR8I-3
Positions stored:	13744
Other SSIDs:	KD8SIQ-13 KD8SIQ-11

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.