Comment:	PyMultimonAPRS iGate, rx only
Last status:	Running on Raspberry Pi with RTL dongle
Location:	50°56.75' N 6°15.15' E - locator JO30DW06HX - show map 4.3 km South bearing 193° from Linnich, North Rhine-Westphalia, Germany [?] 5.5 km Northwest bearing 337° from Aldenhoven, Regierungsbezirk Köln, North Rhine-Westphalia, Germany 48.9 km West bearing 272° from Köln (Koeln), Regierungsbezirk Köln, North Rhine-Westphalia, Germany 77.3 km Southwest bearing 224° from Essen, North Rhine-Westphalia, Germany
Last position:	2025-02-18 19:38:10 UTC (18m45s ago) 2025-02-18 20:38:10 CET local time at Linnich, Germany [?]
Position ambiguous:	Precision reduced at transmitter by 1 digits, position resolution approximately 185.2 m.
Last WX report:	2025-02-18 19:38:10 UTC (18m45s ago) – show weather charts 1.1 °C
Device:	DL1MX: rtl-sdr Python iGate (software)
Last path:	DL6EBP-10>APPM13 via TCPIP*,qAC,T2NUERNBG
Positions stored:	1

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.