Station info - map view · info · telemetry · weather · raw · status · beacons · messages · bulletins · browse · moving · my account
Callsign, ship name or locator: Clear       
It is possible to search using wildcards (*?) after a prefix. Example: OH*
APRS station CT1FSM-2 - show graphs
Comment: Fix lost!
Mic-E message: In service
Location: 38°42.62' N 9°14.70' W - locator IM58JR00OL - show map
5.0 km South bearing 194° from Amadora, Amadora, Lisbon, Portugal [?]
9.7 km West bearing 266° from Lisbon, Lisbon, Lisbon, Portugal
14.6 km Southwest bearing 238° from Moscavide, Loures, Lisbon, Portugal
Last position: 2025-02-18 19:59:14 UTC (16m22s ago)
2025-02-18 19:59:14 WET local time at Amadora, Portugal [?]
Altitude: 120 m
Course: 312°
Speed: 4 km/h
Last telemetry: 2025-02-15 21:06:56 UTC (2d 23h8m ago) – show telemetry
Vin: 13.725 Volt, Temp: 0 C, A3: 0 None, A4: 0 None, A5: 0 None
 O1     O2     O3     O4     I1     I2     I3     I4 
Last path: CT1FSM-2>S8TRVR via WIDE1-1,WIDE1-2,WIDE2-1,qAR,CQ0PSI-3 (bad)
This station is transmitting packets with a configured path of over 3 digipeaters. This causes serious congestion in the APRS network and errors when plotting the station's route on a map. Please consider using a path of WIDE1-1,WIDE2-1 or WIDE2-2, or even WIDE1-1,WIDE2-2 if you are moving very far away from an iGATE. If WIDE1-1 is used in the path, it should be the first component of the path, so that a fill-in digipeater would be the first one to retransmit the packet. Path element WIDE1-2 does work - please use WIDE1-1 instead. In path element WIDEn-N, n must be greater than or equal to N.
Positions stored: 23816
Other SSIDs: CT1FSM-3 CT1FSM-12 CT1FSM CT1FSM-10 CT1FSM-4 CT1FSM-5
Last heard a station directly: 2025-01-16 15:19:34 UTC (33d 4h56m ago)
Stations which heard CT1FSM-2 directly on radio –
callsign pkts first heard - UTC last heard longest (tx => rx) longest at - UTC

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.
About this site
This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.
User guide · FAQ · Blog · Discussion group · Linking to aprs.fi · AIS sites · Service status · Database statistics · Advertising on aprs.fi · Technical details · API · Change log · Planned changes · Credits and thanks · Terms Of Service · iPhone/iPad APRS